Copy and Edit

ER-2031 block review

Description

Quiz on ER-2031, created by Kaitlyn Hickey on 03/02/2018.
Kaitlyn Hickey
Quiz by Kaitlyn Hickey, updated more than 1 year ago
Kaitlyn Hickey
Created by Kaitlyn Hickey over 6 years ago
33
3
0

Resource summary

Question 1

Question
What is the maximum number of trip coils required for a three phase motor?
Answer
  • 2
  • 3
  • 5
  • Not required

Question 2

Question
What type of three phase motor has the ability to correct its own power factor and the power factor of other devices connected to the same line?
Answer
  • Resistance-start induction-run
  • Squirrel-cage induction
  • Synchronous
  • Wound-rotor induction

Question 3

Question
What is the maximum time-delay fuse that can be used with a three-phase motor of the full load current?
Answer
  • 125%
  • 175%
  • 225%
  • 300%

Question 4

Question
How can locked rotor current be described?
Answer
  • It is the current that wound rotor motor reaches at synchronous speed
  • It’s the full load current of a squirrel cage motor
  • It’s the stall current of a three-phase motor
  • It’s the starting current of a squirrel cage motor

Question 5

Question
The over current device will not permit a motor to start. What is the maximum time-delay fuse that can be used with a three-phase motor of the full load current?
Answer
  • 125%
  • 225%
  • 300%
  • 400%

Question 6

Question
What is the basic principle of operation for all three-phase motors?
Answer
  • A rotating magnetic field
  • DC field operation
  • Brushless field excitation
  • Maintenance

Question 7

Question
A wound rotor motor has a strong starting torque and maintains a smooth acceleration from start to full speed. What percent of full load torque is usually produced?
Answer
  • 50-100 percent
  • 100-200 percent
  • 200-300 percent
  • 300-400 percent

Question 8

Question
What is the phase voltage of a three-phase 600 volt squirrel cage connected delta?
Answer
  • 208V
  • 347V
  • 600V
  • 750 V

Question 9

Question
What does the service factor reveal about the motor?
Answer
  • The length of time the motor may be operated before resting
  • The expected life of a motor
  • How often the motor should be serviced
  • How much of the motor can be continuously loaded without damaging it

Question 10

Question
What is the conduction called if one phase of a three-phase motor opens?
Answer
  • Double phasing
  • Single phasing
  • Triple phasing
  • Free running

Question 11

Question
When installing an electrical motor that is totally enclosed, non-vented, with class F insulation rating, the conductors supplying it needs to be rated for what temperature?
Answer
  • 75C
  • 90C
  • 110C
  • 125C

Question 12

Question
A nine lead motor may be connected in wye or delta internally. If this connection is been tested by checking T7, T8, T9 what is it been tested for?
Answer
  • Lugs
  • Polarity
  • Continuity
  • Rotation

Question 13

Question
What is the temperature rating of the conductors supplying a motor with a class H insulation rating?
Answer
  • 90C
  • 100C
  • 110C
  • 120C

Question 14

Question
What is the maximum feeder conductor ampacity required to supply a bank of three phase motor are: 96 A, 27A, and 156A
Answer
  • 279A
  • 318A
  • 337A
  • 303A

Question 15

Question
What size of R90 copper conductor is used in a feeder conduit to supply three motors having a full load current of 100amps, 20 amps, and 10 amps? 75 degree rated
Answer
  • #1/0 AWG
  • #1 AWG
  • #400mcm
  • #2/0 AWG

Question 16

Question
What is the speed at 60 Hz of a 12 pole synchronous motor?
Answer
  • 120 rpm
  • 300rpm
  • 600 rpm
  • 1200rpm

Question 17

Question
In a wound rotor motor, the torque characteristic can be altered by?
Answer
  • Adding or removing external resistance
  • Adding and removing external inductance
  • Adding or removing external capacitance
  • Torque may not be altered

Question 18

Question
Three-phase motor windings are installed ____ electrical degrees apart from each other
Answer
  • 90
  • 120
  • 180
  • 270

Question 19

Question
What is the term used to describe the amount of torque required to pull the rotor into synchronous speed?
Answer
  • Cut-out torque
  • Cut-in torque
  • Pull-out torque
  • Pull-in torque

Question 20

Question
What is the term used to describe the angle between the centre of the stator pole and the centre is the rotor pole?
Answer
  • Torque angle
  • Angle of incidence
  • Phasing angle
  • Synchronous angle

Question 21

Question
What is the advantage of a synchronous motor?
Answer
  • Constant speed from no load to full load
  • Lower voltage starting
  • Can run on either AC and DC
  • Speed can be controlled

Question 22

Question
What size time-delay fuse is required for a three phase, 25hp, 600v, scim
Answer
  • 20 A
  • 30A
  • 15A
  • 40A

Question 23

Question
What meter is used to check phasing in a 3-phase motor when it is de-energized and out of service?
Answer
  • Clamp-on meter
  • Multimeter
  • Phase rotation meter
  • Phase sequence meter

Question 24

Question
What powers the field generation in a typical synchronous motor?
Answer
  • External resistor
  • External DC source
  • External AC source
  • External capacitors

Question 25

Question
The basic principle of all 3 phase motors for synchronous motor is?
Answer
  • Reluctance
  • Capacitance
  • Induction
  • Rotation

Question 26

Question
By checking leads T7, T8, T9 of a nine lead motor, an electrician can determine
Answer
  • The voltage of the motor
  • The FLA of the motor
  • The winding connection (wye or delta)
  • The service factor of the motor

Question 27

Question
What are synchronous motor mainly used for
Answer
  • Fan
  • Pumps
  • Compressors
  • All of the above

Question 28

Question
The insulation class rating of a totally enclosed non-ventilated motor operating at 90 degrees is
Answer
  • Type A
  • Type F
  • Type B
  • Type H

Question 29

Question
In dual voltage 3 phase motors, the leads are connected in ____ for low voltage and in ____ for high voltage
Answer
  • Parallel-series
  • Series-parallel
  • Delta-wye
  • Wye-delta

Question 30

Question
To find the size of fuse holders that accommodates fuses supplying a group of motors, you must take ____ off the largest motor current and add to this valve of the full load currents of all other motors in a group that may be in operation at the same time.
Answer
  • 115%
  • 150%
  • 200%
  • 300%

Question 31

Question
Which markings are used to designate the rotor terminals of a wound rotor motor?
Answer
  • L1 L2 L3
  • F1 F2 F3
  • M1 M2 M3
  • T1 T2 T3

Question 32

Question
In order to not trip, what is the maximum percent rating for an instaneous trip circuit breaker of an AC motor?
Answer
  • 700%
  • 900%
  • 1300%
  • 1500%

Question 33

Question
What is the speed of rotation of the magnetic field called in a three-phased motor?
Answer
  • Magnetic
  • Slip
  • Synchronous
  • Rotor

Question 34

Question
What is the proper rating of a time-delay fuse for a 230v, 22.38 KW, auto-transformer start continuous duty motor
Answer
  • 100Amp
  • 125Amp
  • 150Amp
  • 225Amp

Question 35

Question
A three-phase motor has a synchronous speed of 1800RPM, operates at a frequency of 60Hz and has a slip speed of 100RPM. What is the rotor speed of the motor?
Answer
  • 1700 RPM
  • 1900 RPM
  • 2000 RPM
  • 2100 RPM

Question 36

Question
What is the purpose of the centrifugal switch in split phase motor?
Answer
  • It removes the start winding from the motor in split phase motors
  • It adds the start winding from the motor circuit
  • It removes the run winding from the motor circuit
  • It adds the run winding from the motor circuit

Question 37

Question
What is the speed at which the centrifugal switch of a split phase motor will operate?
Answer
  • 60%
  • 65%
  • 70%
  • 75%

Question 38

Question
How is the rotor of a 15 hp synchronous motor operating on line voltage excited?
Answer
  • AC voltage
  • Induced magnetic field
  • AC line voltage
  • DC current

Question 39

Question
Which starting method provides the highest torque per ampere?
Answer
  • Auto-transformer
  • Across the line
  • Primary resistor
  • Wye-delta

Question 40

Question
What part of the wound rotor motor differs from that of a squirrel cage induction motor?
Answer
  • Stator
  • Rotor
  • End bells
  • Bearings

Question 41

Question
What size time delay fuse can be used on a 3 phase, 230V, auto transformer starting motor consuming 22.38 KW of power
Answer
  • 70 amps
  • 80amps
  • 90 amps
  • 100amps

Question 42

Question
What does increasing the frequency of the supply voltage to an induction motor cause?
Answer
  • Increased speed
  • Decreases speed
  • Increased torque
  • Decreased torque

Question 43

Question
A nine-lead dual voltage three-phase SCIM is connected in the lower voltage delta arrangement. Which terminals are connected to each other?
Answer
  • L1-T1, T7-T4, L2-T2, T8-T5, L3-T3, T9-T6
  • L1-T1-T7-T6, L2-T2-T8-T4, L3-T3-T9-T5
  • L1-T1-T8, L2-T2-T7, L3-T3-T9, T4-T5-T6
  • L1-T1,L2-T2,L3-T3,T7-T4,T8-T5,T9-T6

Question 44

Question
What is the ampacity of conductors feeding a 3 phase, 230V, SCIM, continuous duty motor rated at 20hp, 10hp, 1Hp, and 5Hp?
Answer
  • 77.1A
  • 88.3A
  • 114.9A
  • 116.6A

Question 45

Question
What meter is used to check the input phasing before installing a three-phase motor?
Answer
  • Phase rotation meter
  • Wattmeter
  • Motor rotation meter
  • Syncroscope

Question 46

Question
What effect does increasing the frequency of the supply have on the speed of the rotating magnetic field?
Answer
  • Increases
  • Decreases
  • No change
  • Changes direction

Question 47

Question
How does the starting current of a split phase motor compare to its full load current?
Answer
  • It’s much higher than the FLA
  • It’s much lower than the FLA
  • It’s equal to the FLA
  • It’s equal to the stall current

Question 48

Question
What information is required to size the overload protection of a 15Hp l, 600V, three-phase motor?
Answer
  • HP & FLA
  • SF AND FLA
  • V and FLA
  • Wire size and SF

Question 49

Question
A 5 Hp, 3 phase motor has a voltage of 208v and draw a 12A. It has a power factor of 95%. What is the efficiency?
Answer
  • 75.6%
  • 90.8%
  • 110%
  • 157%

Question 50

Question
Which variables are identified by the motor service factor when considering the maximum continuous permissible load?
Answer
  • Voltage and amps
  • Voltage and frequency
  • Amps and frequency
  • RPM and voltage

Question 51

Question
A synchronous motor has a lagging power factor. How is the corrected?
Answer
  • Over excite the field
  • Add a capacitor
  • Increase the load reduce the load
  • Reduce the load

Question 52

Question
Which 3 phase motor provides maximum starting torque?
Answer
  • Capacitor run
  • Capacitor start
  • Induction run
  • Resistance run
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

Constitutional Law
jesusreyes88
Application of technology in learning
Jeff Wall
Macbeth cards
gregory.rolfe
Geography Restless Earth
sophieelizabeth
GCSE Biology, Module B4
jessmitchell
Biological Psychology - Stress
Gurdev Manchanda
AP Psychology Practice Exam
Jacob Simmons
GCSE History – The early years and the Weimar Republic 1918-1923
Ben C
chemsitry as level topic 5 moles and equations
Talya Hambling
Diseño de Software
Verny Fernandez
Information security and data protection
хомяк убийца
Browse Library