Question 1
Question
Which wireless security procedure should be used to hide the WLAN ID from wireless clients?
Answer
-
Configure WEP only on the access point
-
Disable the broadcast of the SSID on the access point
-
Decrease the antenna spectrum on each wireless client.
-
Configure MAC address filtering on the access point.
-
Install WAP on the wireless clients
Question 2
Question
When upgrading a CPU, what must be applied between the new CPU and the heat sink/fan?
Answer
-
Adhesive gel or paste
-
Penetrating oil
-
Thermal compound
-
Lubricating grease
Question 3
Question
After a Windows operating system has been installed, which program would a technician use to select the programs that will run at startup?
Answer
-
Task Manager
-
Msconfig
-
Ntldr
-
Regedit
Question 4
Question
What is the default file system used during a fresh installation of Windows 7?
Question 5
Question
Which type of device would be used on a laptop to verify the identity of a user?
Question 6
Question
What can a technician do to help protect wireless network equipment from the effects of RFI?
Answer
-
Lower the humidity level.
-
Keep the equipment plugged into a surge protector
-
Keep the equipment on an antistatic mat
-
Remove cordless telephones from the area.
Question 7
Question
What are two consequences of setting an incorrect boot order in the system BIOS?
Answer
-
The computer displays an "inaccessible Boot Device" error after POST.
-
The computer displays an "Invalid Boot Disk" error after POST.
-
The computer continually restarts without displaying the desktop.
-
The computer displays a "Missing NTLDR" error after POST.
-
The computer locks up without any error messages.
Question 8
Question
A network technician has been asked to determine the best internet connection for a branch office located in a new metropolitan office building. Which connection would provide the highest bandwidth and reliability at the lowest cost?
Answer
-
ISDN
-
DSL
-
Dial-up
-
Satellite
Question 9
Question
Why does a technician wear an antistatic wrist strap?
Answer
-
To prevent damage to electronic components inside the computer
-
To be grounded while working on the computer
-
To keep sensitive computer components dust-free before installation.
-
To use the power supply of the computer to store static electricity
Question 10
Question
When installing a network adapter into a client computer, a technician notices that the contacts on the adapter need to be cleaned, which solution should the technician use to clean the contact?
Question 11
Question
Which location on a hard disk is used by the BIOS to search for operating system instructions in order to boot a PC?
Answer
-
The Windows partition
-
The logical drive
-
The active partition
-
The extended partition
Question 12
Question
A technician is troubleshooting a computer that is experiencing hardware failure detected by the BIOS. What is one way this failure is indicated?
Answer
-
The computer returns an error message that indicates the I/O address of the failing device.
-
The computer automatically boots into safe mode and displays a warning on the screen.
-
The computer emits a pattern of beeps indicating the failing device.
-
The screen flashes with a red background and displays a warning message.
Question 13
Question
(refer to image)
Answer
-
USB
-
Parallel
-
Serial
-
Network
-
Modem
Question 14
Question
What is the purpose of RAID adapters?
Answer
-
To provide enhanced audio and graphic capabilities
-
To connect multiple storage devices for redundancy or speed
-
To allow older PCI technology expansion slots to be used
-
To connect peripheral devices to a PC to improve performance
Question 15
Question
A technician has installed a new sound card in a PC but it is not operating correctly. Where should the technician look to investigate driver problems?
Answer
-
My computer
-
Computer Management
-
Device Manager
-
System Tools
Question 16
Question
After a computer is powered on, Windows 7 fails to start. What initial procedure would a technician use to deal with this failure
Answer
-
Boot from a Windows 7 installation media and access the system restore utility.
-
Access the Control Panel and choose Restore Files from Backup from the System and Security menu.
-
Create a system repair disc and restore the image
-
Press the F2 Key during the boot process and start the computer in safe mode.
Question 17
Question
A technician wants to create a new partition on a new additional hard drive. Which tool should be used?
Answer
-
Disk Management
-
Scandisk
-
Disk Defragmenter
-
Device Manager
-
Chkdsk
Question 18
Question
A technician notices that an application is not responding to commands and that the computer seems to respond slowly when applications are opened.What is the best administrative tool to force the release of system resources from the unresponsive application?
Answer
-
System Restore
-
Event Viewer
-
Task Manager
-
Add or Remove Programs
Question 19
Question
Which key or key sequence pressed during the boot process will allow a user to start a Windows PC using the last known good configuration?
Answer
-
Windows key
-
F12
-
Alt+Z
-
F1
-
F8
Question 20
Question
Which Windows hard drive partition is commonly referred to as the C:drive?
Answer
-
The first primary partition
-
The first extended partition
-
The first logical partition
-
The first volume partition
Question 21
Question
A technician needs to purchase a new video adapter for a computer, In addition to performance and price, which factor should be considered when selecting the adapter?
Question 22
Question
A computer user complains of a computer that freezes up after about five minutes of use. The technician checks the computer BIOS to see if there might be a configuration problem that is causing the computer to behave consistently in this manner, While the technician is reviewing the information, the computer once again freezes. What is the probable cause of the computer problem?
Answer
-
The CPU fan is not functioning
-
The BIOS is corrupt
-
The hard drive is failing
-
The CMOS battery has failed
Question 23
Question
A technician has replaced the batteries in all the company laptops. Which source will have information on the proper disposal requirements for the old batteries?
Question 24
Question
Where would a technician configure a PC to boot from a CD-ROM?
Answer
-
Control Panel
-
My Computer
-
BIOS Settings
-
Start Menu
-
Device Manager
Question 25
Question
A technician just terminated some fiber optic cable and needs to properly dispose of the hazardous waste created during the termination. Where should the technician look for the proper disposal method for the waste?
Question 26
Question
A school is adding computers to a classroom that has none. What type of LAN would the school choose to take advantage of commonly implemented wired technologies?
Answer
-
Token Ring
-
802.11n
-
Ethernet
-
WiMAX
Question 27
Question
A customer has a computer for a home business, but wants to have another computer as a web server. What would be the best solution for the customer to share the monitor, mouse, and keyboard between the two computers?
Answer
-
Multipurpose device
-
Access Point
-
KVM switch
-
network switch
-
USB hub
Question 28
Question
What is the default TCP destination port number or number combination that is used for SSH connections?
Question 29
Question
A technician installed a network adapter in a computer and wants to test network connectivity. The ping command can receive responses from workstations on the same subnet but not from remote workstations. What could be causing the problem?
Answer
-
The NIC driver is out of date
-
The default gateway is incorrect.
-
The operating system is not compatible with the remote sites.
-
The TCP/IP protocol stack is not loaded.
Question 30
Question
Which product is recommended to remove the dust from inside a computer?
Answer
-
Compressed Air
-
Household vacuum cleaner
-
damp cloth
-
dry cloth
Question 31
Question
Which command should a computer technician use on a PC to restore protected system files with known good versions?
Answer
-
defrag
-
chkdsk
-
sfc/scannow
-
msconfig
Question 32
Question
The current IP configuration of a medium size company with several subnets is done manually and is time-consuming. Because of increased network growth, a technician needs a simpler way for IP configuration of workstations. Which service or protocol would simplify the workstation IP configuration task?
Question 33
Question
What are the four layers in the TCP/IP reference model?
Answer
-
application, presentation, internet, network access
-
application, transportation, internet, data link
-
application, transport, internet, network access
-
application, presentation, session, transport
-
physical, data link, internet, transport
Question 34
Question
A PC that is running the Windows 7 operating system has slowed down over a period of time and now takes a long time to launch applications and open various documents. What can be done to remedy the problem?
Answer
-
Dr.Watson
-
System Restore
-
Disk Defragmenter
-
Chkdsk
Question 35
Question
A computer is assigned an IP address of 169.254.33.16. What can be said about the computer, based on the assigned address?
Answer
-
It cannot communicate outside its own network
-
It has a public IP address that has been translated to a private IP address.
-
It can communicate on the local network as well as on the internet.
-
It can communicate with networks inside a particular company with subnets
Question 36
Question
A user complains about being unable to connect to the wireless network. Which two actions should be part of troubleshooting the wireless connection? (Choose two.)
Answer
-
Verify in the laptop software whether any wireless networks are detected.
-
Verify that the laptop is plugged into an electrical outlet
-
Reconfigure TCP/IP settings on the laptop.
-
Try moving the laptop to different places to see if a signal can be detected.
-
Reinsert the laptop battery.
Question 37
Question
Which recommendation should be observed when replacing existing memory?
Answer
-
The new memory should exceed the capability of the hard drive.
-
The new memory should operate at the same speed as the hard drive.
-
The new memory should be as fast or faster than existing memory.
-
The new memory should be as fast or faster as the cache found in the processor.
Question 38
Question
A network specialist has been hired to install a network in a company that assembles airplane engines. Because of the nature of the business, the area is highly affected by electromagnetic interference. Which type of network media should be recommended so that the data communication will not be affected by EMI?
Answer
-
coaxial
-
STP
-
fiber optic
-
UTP
Question 39
Question
A company is expanding its business to other countries. All branch offices must remain connected to corporate headquarters at all times. Which network technology is required to support this scenario?
Question 40
Question
Which step in the troubleshooting process is important to help avoid repeating repair processes that were performed previously?
Answer
-
implementation of the solution
-
documentation of the problem and its solution
-
preparation of a plan of action
-
identification of the problem
Question 41
Question
(refer to image)
Question 42
Question
What are three main characteristics of a Windows 64-bit operating system?
Answer
-
The 64-bit operating system memory management system enhances program performance.
-
The 64-bit operating system can recognize more than 128 GB of RAM
-
The 64-bit operating system has fewer registers to manage applications.
-
The 64-bit operating system has additional security features.
-
The 64-bit operating system has a built-in virtualization mode.
-
The 64-bit operating system runs on a RISC chip architecture.
Question 43
Question
What is an example of PC virtualization?
Answer
-
sharing video and music files in a homegroup network
-
running an instance of Windows Vista from inside a Windows OS
-
configuring a small network to allow an application to be accessed by other PCs in the office
-
Setting up a peer-to-peer network so that a laser printer can be accessed by all workstations
Question 44
Question
A specific computer has an issue that could not be resolved by the help desk technician. The on-site technician finds that Windows updates have been disabled. The technician re-enables the update service, configures the computer for automatic updates, downloads and installs all missing updates, ensures the computer boots successfully, and verifies with the customer that the issue has been resolved. Which step, if any, is next?
Answer
-
Document the findings, actions, and outcomes.
-
Establish a plan of action to resolve the problem and implement the solution.
-
verify full system functionality and, if applicable , implement preventive measures.
-
Test the theory to determine the cause.
-
No further action needed.
Question 45
Question
A technician is designing a hardware preventive maintenance plan for a company. Which strategy should be included in the plan?
Answer
-
Omit performing maintenance operations on components until the equipment malfunction.
-
Schedule and document routine maintenance tasks.
-
Avoid performing maintenance operations on plug and play devices that are controlled by the operating system.
-
Only clean equipment that is requested by the customer.
Question 46
Question
A helpdesk technician takes a call, "Good morning, this is the helpdesk, My name is Greg. How may I help you today?" The frantic caller states, "My computer will not turn on and I have a presentation in 15 minutes." The technician responds, "Now calm down and let us see what we can do" The technician then proceeds to lead the caller through the process of checking power cables and power lights. Which troubleshooting step is being used at this point?
Answer
-
Identify the problem
-
Establish a plan of action to resolve the problem
-
Implement a solution
-
Verify full system functionality and, if applicable, implement preventive measures.
-
Establish a theory of probable cause.
Question 47
Question
On a computer that will not boot, which two actions are recommended in the troubleshooting process after verifying the obvious issues such as power to the computer and display, non-bootable media, and the BIOS boot order options? (choose two.)
Answer
-
Reinstall the operating system
-
Remove unnecessary peripherals.
-
Replace computer components one at a time until the problem is solved.
-
Reset the BIOS settings to factory default
-
Use the Last Known Good Configuration
-
Reinstall the user application
Question 48
Question
Which type of standard interface allows users to connect and disconnect peripheral devices while the computer is running without having to restart?
Question 49
Question
What is the most important reason for the company that the preventive maintenance be done?
Answer
-
Preventive maintenance helps to protect the computer equipment against future problems.
-
Preventive maintenance enables the IT manager to check on the location and state of the computer assets.
-
Preventive maintenance provides an opportunity for junior technicians to obtain more experience in a non-threatening or problem.
-
Preventive maintenance maintenance allows the IT department to regularly monitor the contents of user hard drives to ensure computer use policies are being followed.
Question 50
Question
What is the distance limitation of a single data run for UTP cabling without adding networking devices?
Answer
-
33 ft (10 m)
-
100 ft (31 m)
-
330 ft (100 m)
-
500 ft (154 m)