1838084
Description
Quiz by james crowley, updated more than 1 year ago
|
Created by james crowley
almost 10 years ago
|
|
Question 1
Question
1. Which one of the following timbers is a softwood?
Answer
-
a. Oak
-
b. Pine
-
c. Mahogany
-
d. Walnut
Question 2
Question
2. A non-ferrous substance does not contain what type of metal?
Answer
-
a. Lead
-
b. Copper
-
c. Aluminium
-
d. Iron
Question 3
Question
3. What type of joinery work is undertaken during the second fix phase?
Answer
-
a. Hanging doors
-
b. Stud work
-
c. Rafters
-
d. Joists
Question 4
Question
4. What tool can be used to scrape off loose paint from mouldings?
Answer
-
a. Trimming knife
-
b. Shave hook
-
c. Scraper
-
d. Filling knife
Question 5
Question
5. What would you use a needle gun for?
Answer
-
a. Applying filler
-
b. Scraping off old paint
-
c. Stripping off wallpaper
-
d. Removing rust from metal
Question 6
Question
6. Which of these tools would you not use when stripping off a rusty metal gate?
Answer
-
a. Scraper
-
b. Wire brush
-
c. Filling blade
-
d. Chipping hammer
Question 7
Question
7. Knotting solution is used to:
Answer
-
a. Seal all the bare wood prior to priming
-
b. Seal knots in wood
-
c. Fill in cracks in the timber
-
d. Stain the timber
Question 8
Question
8. Why should primer be thinned before applying to timber or wood?
Answer
-
a. To make the job quicker
-
b. To make the undercoat easier to apply
-
c. To help the primer penetrate the timber
-
d. To get rid of any dust on the wood
Question 9
Question
9. Decorator’s caulk is used to fill:
Answer
-
a. Large holes in walls
-
b. Gaps on skirting boards and door frames
-
c. Cracks in ceilings
-
d. Holes in putty
Question 10
Question
10. When mixing two pack filler you need to add:
Answer
-
a. Water
-
b. Putty
-
c. White spirit
-
d. A liquid hardener
Question 11
Question
11. Silicone carbide is also known as:
Answer
-
a. Wet and dry
-
b. Glass paper
-
c. Aluminium oxide
-
d. Sandpaper
Question 12
Question
12. The main ingredient used in knotting solution is:
Answer
-
a. Shellac
-
b. White spirit
-
c. Methylated spirit
-
d. Water
Question 13
Question
13. Acrylic primer can be used on:
Answer
-
a. Plaster surfaces
-
b. Metal surfaces
-
c. Timber surfaces
-
d. Brickwork
Question 14
Question
14. Etch primer is applied to which surface?
Answer
-
a. Galvanised metal
-
b. Plastered walls
-
c. Bare timber
-
d. Plastic guttering
Question 15
Question
15. When rectifying the surface defect efflorescence you should:
Answer
-
a. Wash down with water
-
b. Brush down with a soft bristle brush
-
c. Brush down with a stiff brush
-
d. Burn off with a heat gun
Question 16
Question
16. Bittiness found in paint is caused by:
Answer
-
a. Dirt, grit or dust in the paint
-
b. Poor preparation of the surface
-
c. Not dusting the surface down prior to application of surface coatings
-
d. All of the above
Question 17
Question
17. Applying a surface coating over polish, oil or wax can cause which defect?
Answer
-
a. Cissing
-
b. Flashing
-
c. Flaking
-
d. Blooming
Question 18
Question
18. After raking out a crack the next stage is to:
Answer
-
a. Fill the crack
-
b. Wet in with clean water
-
c. Soak the whole area
-
d. Wash down with sugar soap
Question 19
Question
19. Proud filling means:
Answer
-
a. You have done a good job
-
b. You leave the filler flush with the surface
-
c. You leave the filler higher than the surface
-
d. You leave the filler lower than the surface
Question 20
Question
20. When burning off old paint with a heat gun what type of PPE should you use?
Answer
-
a. Safety goggles
-
b. Gloves
-
c. Overalls
-
d. All of the above
Want to create your own Quizzes for free with GoConqr? Learn more.