q1 | Quiz

1

During which test process activity of the Fundamental Test Process do you evaluate the testability of the requirements?

1

Select all of the statements that describe common test metrics:

a.Percentage of work done in test case preparation.
b.Defect information.
c.Number of lines of code.
d.Dates of test milestones.

1

Which of the following types of defects does use case testing help uncover?

a.Defects in the process flows during real-world use of the system.
b.Defects in individual components.
c.Integration defects caused by the interaction and interference of different components.
d.Defects in the system as it transitions between one state and another.

1

Where is the outline of a test summary given?

1

A system includes password protected data input. The data input screen first requires the user to enter a valid password containing from 6 – 12 characters, including at least 1 numerical character. No data can be input by the user until a valid password has been supplied. Entry of a non-valid password generates an error message and an opportunity to try again.

A test case has been written to address the password validation and a test procedure must now be designed for that test case.

Which of the following test procedures will be the MOST effective for a manual tester who is unfamiliar with the system?

1

Which of the following statements characterise exploratory testing?

a.Testing is carried out within time boxes.
b.A useful approach where there are inadequate specifications.
c.Tests are derived based on structure of the code.
d.Is a complementary technique to structured testing.

1

The above diagram represents the following paths through the code:

a.vwy.
b.vwz.
c.vxy.
d.vxz.

What is the MINIMUM combination of paths required to provide full statement coverage?

1

A programme level Master Test Plan states that a number of best practices must be adopted for its project life cycle models, irrespective of whether a sequential or iterative-incremental approach is adopted for by each project. Which of the following life cycle related best practices would you expect to see in the Master Test Plan?

a.Each test level has its own, specific, test objectives.
b.Each project should have four test levels when adopting the V-model.
c.Test analysis and design for a test level should start before its corresponding development activity is complete.
d.System testing must not be performed by the development teams.

1

A bank offers a number of current accounts based on the balance held on a continuous basis as follows:

Balance above 0 but below £1500 – Ordinary Account.
Balance at least £1500 but below £4500 – Premium Account.
Balance at least £4500 but below £5600 – Platinum Account.
Balance at least £5600 – Special Account.

(Units are in pounds)

Which of the following values are boundary values?

1

Given the following state transition table:

Which of the test cases below will cover the following series of state transitions:

S1 – S0 – S1 – S2 – S0

1

Which one of the following is true?

1

Which one of the following is a project risk?

1

A candidate sits an exam with 40 questions. To pass, the candidate must answer at least 25 questions correctly. To gain a distinction, a mark of 32 or above must be achieved. Which of these groups of exam scores fall into the same equivalence partition?

1

Which of the following is a scripting technique that can be used effectively with test execution tools?

1

A system requires 100% statement and 100% decision coverage at component testing for all modules. The following module, shown in the control flow diagram below, has been tested with two test cases.

Test case 1 follows the path A, B, D, E, F, G
Test case 2 follows the path A, C, D, E, F, G

What level of coverage has been achieved?

1

Which of the following would you NOT usually find on a software incident report?

1

Within error guessing, there is an approach to testing called a fault attack. Which of the following BEST describes this approach?

1

Which of the following is a MAJOR task of test implementation and execution?

1

Which of the following is a purpose of the review ‘planning’ activity?

1

Which of the following is correct?

1

Which of the following are black box techniques?

a.Equivalence Partitioning.
b.Condition Coverage.
c.Decision Testing.
d.Decision Table Testing.
e.Statement Testing.

1

Which of the following is a characteristic of good testing?

1

Which one of the following BEST describes a purpose of static testing?

1

Given the following pseudo code:

READ A
READ B
READ C
IF (A>B or A>C) THEN
Print ‘A is too large’
ELSE
IF (B=C) THEN
Print ‘B cannot be the same as C’
ENDIF
ENDIF

What is the minimum number of tests which would be required for 100% statement and for 100% decision coverage?

1

Which of the following would NORMALLY be provided by a configuration management system?

a.Incident management.
b.Version control of all items of software.
c.Unambiguous referencing of all identified documents and software items.
d.Test estimation.

1

Which of the following BEST describes the purpose of structural testing?

1

Which one of the following is an objective of a pilot project when introducing a tool to an organisation?

1

Which activities form part of test planning?

a.Developing test cases.
b.Defining the overall approach to testing.
c.Assigning resources.
d.Building the test environment.
e.Writing test conditions.

1

In which phase of the Fundamental Test Process is the mission of testing verified and objectives set?

1

Which two of the following statements BEST describe the difference between dynamic testing and debugging?

a.Dynamic testing aims to identify defects.
b.Dynamic testing aims to identify failures caused by defects.
c.Dynamic testing aims to assess the quality of the software.
d.Debugging aims to find and remove defects.
e.Debugging aims to find, analyse and remove the cause of failure.

1

Which of the following describe the MOST common characteristics of specification based techniques?

a.Test conditions and test cases may be identified from models.
b.Test cases may be derived based on knowledge of previous faults.
c.The order of test execution may be determined systematically.
d.Models enable test cases to be derived systematically.

1

Given the following decision table: What is the expected result for each of the following test cases (TC1 and TC2)?

TC1: Fred is a silver card holder with 10 cabin points.
TC3: Carol is a premium ticket holder with no silver card and no cabin points.

1

What type of testing would be triggered by a planned upgrade to a live system’s database?

1

Which of the following activities would NORMALLY be undertaken during test planning?

a.Defining the test levels.
b.Designing test conditions.
c.Controlling test progress.
d.Identifying the objectives of testing.
e.Determining tests data requirements.
f.Defining the testing roles.

1

Which of the following activities should be considered before purchasing a tool for an organization?

a.Conduct a proof-of concept to establish compatibility of the tool with current infrastructure.
b.Retire existing toolsets to avoid potential tool conflicts.
c.Assess the testing organisation’s process maturity.
d.Recruit specialists with knowledge of the tool into the test team.

1

Which one of the following is GENERALLY true?

1

Which one of the following BEST describes a potential benefit of independent testing?

1

Which two of the following would be typically found by a static analysis tool?

a.That the specification has incorrectly allocated a value to variable A.
b.That the code creates a variable B but does not make use of it.
c.That the system does not return the expected value of variable C.
d.That variable D has been incorrectly declared as an integer.

1

The above table shows 6 test procedures (P to U) that must now be entered into a test execution schedule. Business severity is regarded as the most important element in determining the sequence of the test procedures, but other dependencies must also be taken into consideration. Regression testing can only be run once all other tests have completed.
Which of the following represents the MOST effective sequence for the test execution schedule (where the first entry in the sequence is the first procedure to be run, the second entry is the second to be run and so on)?

1

Which of the following are MOST likely to be considered a risk of using test tools, after successful deployment?

a.Poor support from the tool’s vendor.
b.The tool does not work against the current application.
c.The tool does not work with the current test process.
d.Over optimistic expectations of the tool’s capabilities.

qa

q1

During which test process activity of the Fundamental Test Process do you evaluate the testability of the requirements?

Select all of the statements that describe common test metrics: a.Percentage of work done in test case preparation. b.Defect information. c.Number of lines of code. d.Dates of test milestones.

Where is the outline of a test summary given?

Which of the following statements characterise exploratory testing? a.Testing is carried out within time boxes. b.A useful approach where there are inadequate specifications. c.Tests are derived based on structure of the code. d.Is a complementary technique to structured testing.

The above diagram represents the following paths through the code: a.vwy. b.vwz. c.vxy. d.vxz. What is the MINIMUM combination of paths required to provide full statement coverage?

Given the following state transition table: Which of the test cases below will cover the following series of state transitions: S1 – S0 – S1 – S2 – S0

Which one of the following is true?

Which one of the following is a project risk?

A candidate sits an exam with 40 questions. To pass, the candidate must answer at least 25 questions correctly. To gain a distinction, a mark of 32 or above must be achieved. Which of these groups of exam scores fall into the same equivalence partition?

Which of the following is a scripting technique that can be used effectively with test execution tools?

Which of the following would you NOT usually find on a software incident report?

Within error guessing, there is an approach to testing called a fault attack. Which of the following BEST describes this approach?

Which of the following is a MAJOR task of test implementation and execution?

Which of the following is a purpose of the review ‘planning’ activity?

Which of the following is correct?

Which of the following are black box techniques? a.Equivalence Partitioning. b.Condition Coverage. c.Decision Testing. d.Decision Table Testing. e.Statement Testing.

Select all of the statements that describe common test metrics:

a.Percentage of work done in test case preparation.
b.Defect information.
c.Number of lines of code.
d.Dates of test milestones.

Which of the following statements characterise exploratory testing?

a.Testing is carried out within time boxes.
b.A useful approach where there are inadequate specifications.
c.Tests are derived based on structure of the code.
d.Is a complementary technique to structured testing.

The above diagram represents the following paths through the code:

a.vwy.
b.vwz.
c.vxy.
d.vxz.

What is the MINIMUM combination of paths required to provide full statement coverage?

Given the following state transition table:

Which of the test cases below will cover the following series of state transitions:

S1 – S0 – S1 – S2 – S0

Which of the following are black box techniques?

a.Equivalence Partitioning.
b.Condition Coverage.
c.Decision Testing.
d.Decision Table Testing.
e.Statement Testing.

Given the following pseudo code:

READ A
READ B
READ C
IF (A>B or A>C) THEN
Print ‘A is too large’
ELSE
IF (B=C) THEN
Print ‘B cannot be the same as C’
ENDIF
ENDIF

What is the minimum number of tests which would be required for 100% statement and for 100% decision coverage?

Which of the following would NORMALLY be provided by a configuration management system?

a.Incident management.
b.Version control of all items of software.
c.Unambiguous referencing of all identified documents and software items.
d.Test estimation.

Which activities form part of test planning?

a.Developing test cases.
b.Defining the overall approach to testing.
c.Assigning resources.
d.Building the test environment.
e.Writing test conditions.

Given the following decision table: What is the expected result for each of the following test cases (TC1 and TC2)?

TC1: Fred is a silver card holder with 10 cabin points.
TC3: Carol is a premium ticket holder with no silver card and no cabin points.

Which of the following activities would NORMALLY be undertaken during test planning?

a.Defining the test levels.
b.Designing test conditions.
c.Controlling test progress.
d.Identifying the objectives of testing.
e.Determining tests data requirements.
f.Defining the testing roles.